Hot water heaters are one of a house’s hardest functioning appliances. Day or night, it’s churning out perfectly heated water whenever you would like it. When it unexpectedly is no longer working adequately, most of us often worry.
Thankfully a non-functioning water heater does not constantly mean a costly repair work. Prior to making an emergency call to Haynes Plumbing, we recommend inspecting the issue yourself first.
Annapolis Water Heater Repair Troubleshooting
For gas water heaters first eliminate the small panel which is located at the bottom of the unit and examine to notice if the pilot light is lit.
Check if will relight when it’s not ignited. If it remains lit, one should have the ability to listen that the water heater should start functioning correctly once again. The pilot light may well need cleaned or the thermocouple may require to be replaced when the pilot light will definitely not continue being lit.
The name thermocouple might possibly sound like a really technical term, however it’s a part on ones water heater that can easily be replaced. Haynes Plumbing would suggest having us perform the replacement but the measures below are for informative purposes.
Check the owner’s manual. It needs to have suggestions for how to get rid of and change the thermocouple.
Switch off the gas prior to taking out anything at all from the water heater.
Using the instructions in your user’s handbook, remove the thermocouple by detaching it from both sides of the pilot light. The brand new thermocouple on the water heater ought to be cut to the correct length.
The gas may then be turned back on and test for leakages, then the pilot light can be lighted again.
Press the Water Heater Reset Button
For those with an electric water heater, discover the position of the reset button and press it until a click is noticed.
If a click is definitely not noticed, or it falls short to restart the water heater, reset the breaker.
If a breaker reset does not suffice, the thermostat will probably need changed.
Both the power to the water heater and the switch on the breaker will need to be turned off. Essential safety with electricity must be used!
Use the owner’s manual to find the thermostat wires, then detach them.
Following removing the thermostat we will evaluate to learn its problem. If it is defective, we will have to replace it.
Heating Element Replacement
While the pwer is still turned off, the access panel on the water heater can be removed.
The terminal screws can be loosened and the wires can be drawn away from the heating element.
We would next test each part of the element to see if they are damaged, and replace them as necessary.
These water heater troubleshooting tips should help get ones heater going once again. Haynes Plumbing is obviously here to help, and so don’t wait to call us today for any Water Heater Repair Annapolis help.